Telecoil, the T setting on Android
Quick answer
Not applicable, it works without a phone. Not applicable, for the same reason. This is the one option that is entirely outside the phone ecosystem.
What is Telecoil, the T setting?
A small copper coil built into many hearing aids that picks up a magnetic signal rather than a radio one. It predates every Bluetooth protocol by decades and is completely independent of any phone or operating system.
A telecoil is the most durable connectivity a hearing aid has, because it is not brand specific and it outlives a change of phone and a change of hearing aid. Any neckloop works with any telecoil equipped aid. The two catches are that not every device has one, and that on many devices which do, it has to be enabled by whoever programmed the aid.
On Android: Not applicable, it works without a phone.
| Platform | Support | Detail |
|---|---|---|
| iPhone | Not applicable, it works without a phone | Not applicable, and that is the point. A telecoil works with an induction loop or a neckloop regardless of what phone you own or whether you own one at all. |
| Android | Not applicable, it works without a phone | Not applicable, for the same reason. This is the one option that is entirely outside the phone ecosystem. |
How Telecoil, the T setting compares with the other routes on Android
Telecoil, the T setting is one of six routes, of which 2 are fully supported on Android.
| Route | On Android | What it needs |
|---|---|---|
| Made for iPhone (MFi) | Not supported | Not supported. MFi is an Apple protocol and an Android phone cannot use it, whatever the hearing aid is capable of. The Android equivalent is ASHA or, on newer hardware, Bluetooth LE Audio. |
| ASHA, Audio Streaming for Hearing Aids | Supported | Supported on Android 10 and later with compatible hardware. Both the phone and the hearing aid have to support it, and phone support has been uneven across manufacturers, so it is worth checking the specific handset rather than the Android version alone. |
| Bluetooth LE Audio | Depends on the device generation | Increasingly supported on recent hardware. As with iOS, it is a hardware capability rather than a software setting, so an older handset running a current Android version may still not have it. |
| Auracast broadcast audio | Depends on the device generation | Depends on device generation rather than on the Android version. Check the specific hardware. |
| Telecoil, the T setting | Not applicable, it works without a phone | Not applicable, for the same reason. This is the one option that is entirely outside the phone ecosystem. |
| Classic Bluetooth with an intermediate streamer | Supported | Works, for the same reason. This is the fallback that works with almost any phone. |
Common questions
- Does Telecoil, the T setting work with Android?
- Not applicable, it works without a phone. Not applicable, for the same reason. This is the one option that is entirely outside the phone ecosystem. Note that this describes the platform side only: the hearing aid has to support the protocol as well, and whether yours does is a specification published by its manufacturer for that model rather than something that can be inferred from the brand.
- How do I find out whether my hearing aids support this?
- Check the specification sheet for your specific model on the manufacturer site, or the documentation supplied with the devices. Streaming support changed substantially between device generations, so the brand name alone tells you very little and a model from two years ago may differ from the current one carrying a similar name.
- What if my hearing aids do not support any direct protocol?
- An intermediate streamer is the answer. It is a separate device worn around the neck or clipped on that receives ordinary Bluetooth from the phone and relays it to the hearing aids on a short range link of the manufacturer own design. It works with practically any phone, at the cost of an extra device to carry and charge.
- Does streaming affect battery life?
- Yes, substantially. Regular streaming roughly doubles the current a hearing aid draws compared with amplification alone, because the device is running a radio as well as an amplifier. On a battery device this can more than halve the days between changes, and on a rechargeable one it shortens the time between charges noticeably.
- Is there an option that does not depend on my phone at all?
- A telecoil. It is a small copper coil built into many hearing aids that picks up a magnetic signal rather than a radio one, works with any induction loop or neckloop, and is entirely independent of your phone and its operating system. Not every device has one, and on many that do it has to be enabled by whoever programmed the aid.
Get the complete hearing gear list
Every item in the starter, everyday and full setups, with running totals, in one printable list. It opens with a hearing evaluation, because that is genuinely the first step. No charge.
One list, no sequence of daily emails, and you can leave at any time.
Last updated 2026-09-17.